PARAGON INDUSTRIAL CORP
Beyond yourselves, persuit of excellent, keep paxce with the times, constant innovation
Add to Cart
Semi Open Impeller “S” Mode Channel Single Stage Centrifugal Pump For Pulp
Description:
The split-casing centrifugal pump is horizontal, the pump case is horizontal on the shaft axial, the up parts is the pump cover, the down parts is the pump casing, the suction and the discharge are all under the axial, its centerline is perpendicular to the axis.It can open the pump cover and take out the rotor parts without disassembling the inlet and outlet pipes when overhauling.The shaft sealing is the soft packing sealing or the mechanical sealing.
Feature:
| Working Principle: | Centrifugal |
| Main applications: | Water |
| Driver: | Electric motor or diesel engine |
| Power Specs: | 110/220V 1phase, 220/380/400/415V 3phase;50hz/60hz |
| Max.permissible fluid temperature | 80°C(176°F) |
| Type of connection: | Flange |
| Installation position: | Horizontal |
| Casing parts material: | Cast iron, Stainless Steel |
| Shaft seal type: | Mechanical seal, packing seal |
| Maximum drive rating: | 90KW(10HP) |
| Maximum caliber: | 200mm(8inch) |
| Maximum discharge-side pressure | 1.25MPa(12.5bar) |
| Maximum head: | 125m(410ft) |
| Flow rate range: | 12.5-400m3/h(27.7-1760US.GPM) |
Application:
It’s mainly used to transfer corrosive media containing suspended particles industrial sectors like petrolem, chemical engineering, synthetic fiber, chemical fertilizer, power station, metallurgy, food and hospital.
Water supply paper making and pharmaceuticals, fire fighting system, etc.