PARAGON INDUSTRIAL CORP
Beyond yourselves, persuit of excellent, keep paxce with the times, constant innovation
Add to Cart
Pumping A Little High Pressure Water Centrifugal Water Pump With 410 SS Shaft
Description:
The screwed hole on the top of pump casing is used for pouring prime water into the pump or connecting, with a vacuum pump to evacuate air and draw up water.
The pump shaft is supported by single-row annular contact ball bearings. The bearings shall be lubricated with oil which should be kept between the lines on the oil level indicator, or with grease which has already been put into the bearing case during assembling, it can be added after the front and rear end coves are dismounted, or by oil holder.
Feature:
1. The front and back of impeller mostly has sealing ring to balance the axial force, and there is balancing hole on the back cover plate of impeller. If the axial force is not too big, there no sealing ring and balancing hole on the back of impeller.
2. The shaft sleeve is installed on the position of packing to protect the shaft to avoid the wear of shaft. Sealing ring is installed between the shaft and sleeve to avoid gas to enter and leak along the surface of shaft.The axial and radial force of pump is borne by the ball bearing.
3. The axial sealing of pump is made up of packing gland, packing and packing ring (mechanical sealing also can be used),which to avoid gas to enter and greatly leak.
4. The series of single-stage centrifugal pump casing and cover make up of the operating room of pump. The impeller, shaft and ball bearing make up of the rotor parts of pump. The hanger supports the rotor parts of pump.
Application:
| a. Application as sprayer equipped with beam nozzle that turning water into little drop irrigation for farm, garden, etc. |
| b. It is suitable for clear water, sea water, acid or alkali chemical medium and slurry (viscosity≤100 centipoises, consistency of solid cannot exceed 30% of total medium). |
| c. Suitable for environment protection, construction, fire fighting, chemical pharmacy, printing, dyeing, brewage, power plant, electroplate, paper making, washing for mining and cooling for equipment. |
| d. It is the ideal machine to delivery slurry to press filters. |
| e. High-rise buildings water supply and drainage, and for fire working |
| f. Cooling systems of air-conditioning in hotels |